FIX ERROR ON HDD

tutorial fix error [s] on HDD

there have 2 different ways to fix errors on hadd from windwos or from MS-DOS command prompt
sometimes we can just using it from windows but sometimes need from dos

how to fix error on harddisk drive from windows:

1 click my computer
2 right click on partition you want scanned
3 select properties
[see image below]



4 click tools > check now
5 thick 2 boxers and click start button

-do it same as step no 1 to no 5 for different partitions
-if C:/system will restart and starting scanned.system will not scan in windows mode
[see picture below]


Remember we cannot always depend on windows only,some cases need scan from DOS. so this is the step by step how to do it

before we start make sure your computer first boot is from cd-rom drive.otherwise chane it first and after that follow step below

1 insert cd windows xp in cd tray
2 start computer and boot it{from cd-rom}
3 Press "R" for repair and press"1"{normally} and hit enter for password.if you have password,please
key in,if not just hit enter.
4 At Prompt type this command

CHKDSK/P/R

[SEE PICTURE BELOW]


Please using CHKDSK/P/R for repair errors otherwise system just scan not fix the problem completely

Step for change directory before scanned [pic above]


Result after scanned at D:\

ok you should try this if your computer not working normal or cannot logon windows or always restart
after logon windows.Anyway,this step good for maintenance too.I did this if i do maintenance on my
computer{scan from windows].if your problem cannot logon windows,follow this step and type this command after scanning complete FIXBOOT C:and press enter

p/s: For Windows XP,not working on Win95/Win98/WinMe